INSTALLATION
Removal / installation · Vehicles built from Aug 2005
- HINT:
- The procedure described below is for the LH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.
| 1. INSTALL FRONT DOOR WINDOW FRAME REAR MOULDING (for 3 Door) |
Clean the attachment surface.

Using an infrared light, heat the adhesive remaining on the body.
- NOTICE:
- Do not burn yourself with the heated body or infrared light.
Using a shop rag or piece of cloth, rub the remaining adhesive off the body.
Using a non-residue solvent, clean the attachment surface.
Apply new double-sided adhesive tape to the front door window frame rear moulding.
Tape size: Area
t
W
H
A
0.8 mm (0.032 in.)
5 mm (0.197 in.)
340 mm (13.386 in.)
B
0.8 mm (0.032 in.)
5 mm (0.197 in.)
376 mm (14.803 in.)
Engage the 2 clips and the claw and install the front door window frame rear moulding.

| 2. INSTALL FRONT DOOR WINDOW FRAME FRONT MOULDING |
Clean the attachment surface.

Using an infrared light, heat the adhesive remaining on the body.
- NOTICE:
- Do not burn yourself with the heated body or infrared light.
Using a shop rag or piece of cloth, rub the remaining adhesive off the body.
Using a non-residue solvent, clean the attachment surface.
Apply new double-sided adhesive tape to the front door window frame front moulding.
Tape size: Area
t
W
H
A
1.2 mm (0.047 in.)
7 mm (0.276 in.)
88 mm (3.465 in.)
Engage the 2 clips and the claw and install the front door window frame front moulding.

