2005-2008 Yaris · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built from Aug 2005


INSPECT INTEGRATION RELAY (Built in Horn Relay)

  1. B124364E01
    Check the resistance.

    1. Remove the horn fuse.

    2. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Destination
      Tester Connection
      Specified Condition
      Europe
      A4 - T5
      10 kΩ or higher
      Below 1 Ω
      (Battery voltage applied to terminals A3 and T5)
      except Europe
      A8 - T6
      10 kΩ or higher
      Below 1 Ω
      (Battery voltage applied to terminals A3 and T5)

      If the result is not as specified, replace the integration relay.

← REMOVAL (from Aug 2005)INSTALLATION (from Aug 2005) →