REMOVAL
Removal / installation · Vehicles built from Nov 2006
| 1.
REMOVE FRONT BUMPER COVER
|
 |
- Apply protective tape as shown in the illustration.
- Remove the 5 screws and the 3 bolts.
Remove the 2 screw grommets.
- Remove the 7 clips.
- Using a screwdriver with its tip wrapped in protective tape, disengage the 6 claws and remove the front bumper cover.
Disconnect the 2 fog light connectors.
| 2.
REMOVE LOW PITCHED HORN ASSEMBLY |
 |
- Disconnect the low pitched horn connector.
Remove the bolt and the low pitched horn.