2005-2008 Yaris · Service Manual TRANSMISSION

REASSEMBLY

Removal / installation · Vehicles built from Aug 2005


1. INSTALL FRONT OIL PUMP OIL SEAL

C081416E01
  1. Coat a new oil seal lip with MP grease.

  1. Using SST and a hammer, drive in a new oil seal.

    SST
    09223-00010  

    Drive in depth:
    -0.085 to 0015 mm (-0.0335 to 0.0059 in.)


2. INSTALL FRONT OIL PUMP DRIVEN GEAR

C059989
  1. Coat the front oil pump driven gear with ATF, and install it onto the oil pump body.


3. INSTALL FRONT OIL PUMP DRIVE GEAR

C059808
  1. Coat the front oil pump drive gear with ATF, and install it onto the oil pump body.


4. INSTALL STATOR SHAFT ASSEMBLY

C059807
  1. Align the stator shaft with the bolt holes.

  1. Install the 8 bolts.

    Torque:
    9.8 N*m{ 100 kgf*cm , 7 ft.*lbf }


5. INSPECT OIL PUMP ASSEMBLY

C059941
  1. Using 2 screwdrivers, make sure that the drive gear turns smoothly.


6. INSTALL FRONT OIL PUMP BODY O-RING

C067790
  1. Coat a new front oil pump body O-ring with ATF, and install it onto the oil pump.

← INSPECTION (from Aug 2005)COMPONENTS (from Aug 2005) →