DISASSEMBLY
Removal / installation · Vehicles built from Aug 2005
| 1. REMOVE DIRECT CLUTCH DISC |
![]() ![]() |
Using a screwdriver, remove the snap ring, clutch flange, clutch discs and 2 clutch plates from the input shaft.
| 2. REMOVE DIRECT CLUTCH RETURN SPRING SUB-ASSEMBLY |
![]() ![]() |
Using SST, a press and snap ring pliers, remove the snap ring and direct clutch return spring.
- SST
- 09387-00020
| 3. REMOVE DIRECT CLUTCH PISTON SUB-ASSEMBLY |
![]() ![]() |
Remove the direct clutch piston by blowing compressed air into the hole as shown in the illustration on the left.
| 4. REMOVE DIRECT CLUTCH PISTON O-RING |
![]() ![]() |
Remove the direct clutch piston O-ring from the direct clutch piston.
Remove the direct clutch piston O-ring from the input shaft.

| 5. REMOVE INPUT SHAFT OIL SEAL RING |
![]() ![]() |
Remove the 2 input shaft oil seal rings from the input shaft.





