DISASSEMBLY
Removal / installation · Vehicles built from Aug 2005
| 1. REMOVE OVERDRIVE BRAKE RETURN SPRING SUB-ASSEMBLY |
![]() ![]() |
Using SST and a press, compress the overdrive brake return spring.
- SST
- 09387-00070
09950-70010 (09951-07100)
Using a screwdriver, remove the snap ring and overdrive brake return spring.
| 2. REMOVE 2ND COAST AND OVERDRIVE BRAKE PISTON |
![]() ![]() |
Remove the 2nd coast and overdrive brake piston from the transaxle rear cover with compressed air.
| 3. REMOVE 2ND COAST AND OVERDRIVE O-RING |
![]() ![]() |
Using a screwdriver, remove the 2 2nd coast and overdrive O-rings from the 2nd coast and overdrive brake piston.
| 4. REMOVE CLUTCH DRUM OIL SEAL RING |
![]() ![]() |
Remove the 2 clutch drum oil seal rings from the transaxle rear cover.
| 5. REMOVE TRANSAXLE REAR COVER PLUG |
![]() ![]() |
Remove the 4 transaxle rear cover plugs from the transaxle rear cover.
Using a screwdriver, remove the O-rings from the transaxle rear cover plug.






