2005-2008 Yaris · Service Manual TRANSMISSION

REASSEMBLY

Removal / installation · Vehicles built from Aug 2005


1. INSTALL TRANSAXLE REAR COVER PLUG

C059819
  1. Coat 4 new O-rings with ATF, and install them onto the transaxle rear cover plug.

  1. Install the 4 transaxle rear cover plugs onto the transaxle rear cover.

    Torque:
    7.4 N*m{ 75 kgf*cm , 65 in.*lbf }


2. INSTALL CLUTCH DRUM OIL SEAL RING

D025205E01
  1. Compress the oil seal ring from both sides to reduce dimension A.

    Dimension A:
    5.0 mm (0.197 in.)

  1. Coat the 2 oil seal rings with ATF, and install them onto the transaxle rear cover.


3. INSTALL 2ND COAST AND OVERDRIVE O-RING

C060019
  1. Coat 2 new 2nd coast and overdrive O-rings with ATF, and install them onto the 2nd coast overdrive brake piston.


4. INSTALL 2ND COAST AND OVERDRIVE BRAKE PISTON

C060025
  1. Coat the 2nd coast and overdrive brake piston with ATF, and install it onto the transaxle rear cover.


5. INSTALL OVERDRIVE BRAKE RETURN SPRING SUB-ASSEMBLY

D008358
  1. Coat the overdrive brake return spring with ATF, and install it onto the transaxle rear cover.

  1. Using SST and a press, shorten the overdrive brake return spring, then install the snap ring.

    SST
    09387-00070  
    09950-70010   (09951-07100)

← INSPECTION (from Aug 2005)COMPONENTS (from Aug 2005) →