INSTALLATION
Removal / installation · Vehicles built from Nov 2005
- HINT:
- The procedure described below is for the LHD. Use the same procedure for both the RHD and LHD, unless otherwise specified.
| 1. INSTALL FRONT PASSENGER SEAT BELT WARNING LIGHT |
Engage the 2 claws and install the front passenger seat belt warning light.

| 2. INSTALL INSTRUMENT PANEL FINISH PANEL END |
![]() ![]() |
with CD player
Connect the connector.
Engage the 4 claws and 3 clips and install the instrument panel finish panel end RH.
Except CD player

Connect the connector.
Engage the 5 claws and 3 clips and install the instrument panel finish panel end RH.
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

