REMOVAL
Removal / installation · Vehicles built from Aug 2005
- NOTICE:
- Always use "Torx" socket wrench E10 when removing the rear seat.
| 1.
REMOVE NO. 1 REAR SEAT LEG COVER
|
 |
- Disengage the 4 claws in the sequence shown in the illustration and remove the No. 1 rear seat leg cover.
| 2.
REMOVE NO. 2 REAR SEAT LEG COVER
|
 |
- Disengage the 3 claws in the sequence shown in the illustration and remove the No. 1 rear seat leg cover.
| 3.
REMOVE REAR SEAT INNER BELT ASSEMBLY |
 |
- Using "Torx" socket wrench E10, remove the 3 bolts and pull up the rear seat cushion.
- Remove the belt from the band.
Remove the bolt and the rear seat inner belt.