2005-2008 Yaris · Service Manual RESTRAINTS

REMOVAL

Removal / installation · Vehicles built from Nov 2005

NOTICE:
Always use "Torx" socket wrench E10 when removing the rear seat.


1. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)

  1. B114569E01
    Remove the 2 package tray trim suspenders.

  1. Remove the 5 pieces of hook tape.

  1. Disengage the 2 claws and remove the package tray trim.


2. REMOVE DECK BOARD SUB-ASSEMBLY (w/ Deck Board)

  1. B106371
    Release the 2 knobs and remove the deck board.


3. REMOVE SPARE WHEEL COVER ASSEMBLY (w/ Deck Board)

  1. B138393
    Remove the spare wheel cover.


4. REMOVE DECK FLOOR BOX (w/ Deck Board)

  1. B106372
    Release the 2 knobs and remove the deck floor box.


5. REMOVE REAR FLOOR CARPET ASSEMBLY (w/o Deck Board)

  1. B138392
    Remove the rear floor carpet.


6. REMOVE REAR SEAT LEG COVER

  1. B124298
    Disengage the 4 claws and remove the No. 1 rear seat leg cover.


7. REMOVE REAR SEAT ASSEMBLY

  1. B124299
    Using "Torx" socket wrench E10, remove the 2 bolts and pull up the rear seat cushion.

  1. B124300
    Using "Torx" socket wrench E10, remove the 2 bolts and rear seat.


8. REMOVE REAR SEAT CUSHION UNDER COVER

  1. B124310
    Disengage the 4 clips and remove the rear seatback cover.

  1. B124311
    Disengage the 4 claws and remove the rear seat cushion under cover.


9. REMOVE REAR SEAT RECLINING INNER COVER

  1. B124312
    Using "Torx" socket wrench T25, remove the screw.

  1. Disengage the 2 claws and remove the rear seat reclining inner cover.


10. REMOVE REAR SEAT INNER BELT ASSEMBLY

  1. B127744E01
    Remove the belt from the rear seatback band.

  1. Remove the bolt, the hook and the rear seat inner belt.

← COMPONENTS (from Nov 2005)INSTALLATION (from Nov 2005) →