2005-2008 Yaris · Service Manual RESTRAINTS

INSTALLATION

Removal / installation · Vehicles built from Aug 2005

NOTICE:
Always use "Torx" socket wrench E10 when installing the rear seat.


1. INSTALL REAR CENTER SEAT INNER BELT ASSEMBLY

  1. B114652E01
    Install the rear center seat inner belt with the bolt.

    Torque:
    42 N*m{ 430 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not place the anchor plate over convex areas of the rear seat back frame.

  1. Install the belt into the band.

  1. B114740E01
    Install the rear seat cushion.

  1. Using "Torx" socket wrench E10, tighten the 3 bolts in the sequence shown in the illustration.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }


2. INSTALL NO. 2 REAR SEAT LEG COVER

  1. B114739
    Engage the 3 claws and install the No. 2 rear seat leg cover.


3. INSTALL NO. 1 REAR SEAT LEG COVER

  1. B114738
    Engage the 4 claws and install the No. 1 rear seat leg cover.

← REMOVAL (from Aug 2005)COMPONENTS (from Aug 2005) →