2005-2008 Yaris · Service Manual ENGINE

REPAIR

Removal / installation · Vehicles built from Aug 2005


1. REPAIR INTAKE VALVE

A067983E01
  1. Repair the intake valve seat.

    NOTICE:
    Releasing the seat-cutter pressure gradually helps to the make valve seat face smoother.

  1. If the seating is too high on the valve face, use 20° and 45° cutters to correct the seat.

  1. A080979E04
    If the seating is too low on the valve face, use 75° and 45° cutters to correct the seat.

  1. Hand-lap the valve and valve seat with an abrasive compound.

  1. Recheck the valve seating position.


2. REPAIR EXHAUST VALVE

NOTICE:
Releasing the seat-cutter pressure gradually helps to make the valve seat face smoother.

  1. If the seating is too high on the valve face, use 20° and 45° cutters to correct the seat.

  1. If the seating is too low on the valve face, use 75° and 45° cutters to correct the seat.

  1. Hand-lap the valve and valve seat with an abrasive compound.

  1. Recheck the valve seating position.

← INSTALLATION (from Jan 2006)COMPONENTS (Aug 2005 – Dec 2005) →