REPAIR
Removal / installation · Vehicles built from Aug 2005
| 1. REPAIR INTAKE VALVE |
![]() ![]() |
Repair the intake valve seat.
- NOTICE:
- Releasing the seat-cutter pressure gradually helps to make the valve seat face smoother.
If the seating is too high on the valve face, use 20° and 45° cutters to correct the seat.
If the seating is too low on the valve face, use 75° and 45° cutters to correct the seat.

Hand-lap the valve and valve seat with an abrasive compound.
Recheck the valve seating position.
| 2. REPAIR EXHAUST VALVE |
- NOTICE:
- Releasing the seat-cutter pressure gradually helps to make the valve seat face smoother.
If the seating is too high on the valve face, use 20° and 45° cutters to correct the seat.
If the seating is too low on the valve face, use 75° and 45° cutters to correct the seat.
Hand-lap the valve and valve seat with an abrasive compound.
Recheck the valve seating position.

