INSPECTION
Inspection · Vehicles built from Aug 2005
| INSPECT DOOR CONTROL SWITCH |
![]() ![]() |
Check the resistance.
Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
3 - 5
Locked
10 kΩ or higher
3 - 5
Unlocked
Below 1 Ω
4 - 5
Locked
Below 1 Ω
4 - 5
Unlocked
10 kΩ or higher
1 - 6
Illumination Circuit
Below 1 Ω
Check the illumination operation.
Connect the positive (+) battery lead to terminal 6 and the negative (-) battery lead to terminal 1, then check that the illumination illuminates.
- Standard:
- Illumination illuminates.


