INSTALLATION
Removal / installation · Vehicles built from Aug 2005
| 1. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY REAR |
![]() ![]() |
Engage the set plate and install the power window regulator switch.
| 2. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY |
![]() ![]() |
Connect the rear door lock remote control cable and rear door inside locking cable.
Connect the connector.
Engage the 7 clips and install the rear door trim board.

Tighten the 2 screws.

Engage the 3 claws and install the rear door armrest plug.

| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }


