INSTALLATION
Removal / installation · Vehicles built from Jan 2006
| 1. INSTALL REAR SEATBACK ASSEMBLY |
Engage the 3 hooks and install the rear seatback.

Tighten the 3 bolts.
- Torque:
- 7.9 N*m{ 80 kgf*cm , 70 in.*lbf }
Install the rear seat outer belt into the rear seat shoulder belt guide.

- HINT:
- Use the same procedure for both sides.
for 3 Point Type Rear Center Seat belt:
Install the rear center seat outer belt into the rear center seat shoulder belt guide.
| 2. INSTALL REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY |
Pass the rear seat inner belt through the rear seat cushion cover pad slit.

Engage the 3 hooks and install the rear seat cushion cover pad.
- NOTICE:
- SE Make sure that the 2 rear seat cushion lock hooks and the rear seat cushion frame are securely engaged.
