REMOVAL
Removal / installation · Vehicles built from Aug 2005
| 2.
DRAIN BRAKE FLUID |
 |
- NOTICE:
- Immediately wash off any brake fluid that comes into contact with any painted surfaces.
| 3.
REMOVE REAR BRAKE DRUM SUB-ASSEMBLY |
 |
Release the parking brake and remove the rear brake drum.
If the rear brake drum cannot be removed easily, perform the following procedure.
- Remove the hole plug and insert a screwdriver through the hole into the backing plate, and hold the automatic adjust lever away from the adjuster.
Using another screwdriver, contract the brake shoe by turning the adjusting bolt.