2005-2008 Yaris · Service Manual BRAKE

DISASSEMBLY

Removal / installation · Vehicles built from Jan 2006


1. REMOVE REAR BRAKE SHOE KIT

C108968E01
  1. Using SST, separate the shoe return spring from the front brake shoe.

    SST
    09703-30010  

    NOTICE:
    Do not damage the wheel cylinder boot.

  1. C108969E01
    Using SST, remove the shoe hold down spring cup, shoe hold down spring, pin and front brake shoe.
    SST
    09718-00010  

  1. Remove the tension spring.

  1. C108970
    Remove the shoe return spring from the rear brake shoe and remove the parking brake shoe strut set.

  1. C108971E01
    Using SST, remove the shoe hold down spring cup, shoe hold down spring, pin and rear brake shoe.
    SST
    09718-00010  

  1. C108972
    Using needle-nose pliers, separate the parking brake cable.


2. REMOVE REAR BRAKE AUTOMATIC ADJUST LEVER

C062254
  1. Remove the automatic adjust lever tension spring and remove the automatic adjust lever.


3. REMOVE REAR BRAKE PARKING BRAKE SHOE LEVER SUB-ASSEMBLY

C108973
  1. Using a screwdriver, remove the C-washer and remove the parking brake shoe lever.


4. REMOVE REAR WHEEL BRAKE CYLINDER ASSEMBLY

C108974E01
  1. Using SST, separate the brake tube from the rear wheel brake cylinder.

    SST
    09023-00100  

    HINT:
    Use a container to catch the brake fluid.

  1. C108975
    Remove the bleeder plug cap.

  1. Remove the bleeder plug.

  1. Remove the bolt and remove the rear wheel brake cylinder.


5. REMOVE REAR WHEEL CYLINDER KIT

F044261E01
  1. Remove the 2 wheel cylinder boots from the wheel brake cylinder.

  1. Remove the 2 pistons.

  1. Remove the compression spring.

  1. Remove the wheel cylinder cup from each piston.

← REMOVAL (from Jan 2006)INSPECTION (from Jan 2006) →