2005-2008 Yaris · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built from Nov 2005


1. REMOVE REAR WHEEL

2. DRAIN BRAKE FLUID

NOTICE:
Immediately wash off any brake fluid that comes into contact with any painted surfaces.


3. REMOVE REAR BRAKE FLEXIBLE HOSE

C116900E01
  1. Using SST, separate the brake tubes.

    SST
    09023-00100  

  1. Remove the 2 clips and flexible hose from the axle beam.

  1. C122242E01
    for Rear Disc Brake:

    1. Using SST, separate the brake tube.

      SST
      09023-00100  

    2. Remove the clip and disconnect the flexible hose from the axle beam.

    3. C108943
      Remove the union bolt, gasket and flexible hose from the disc brake cylinder.

← COMPONENTS (from Nov 2005)INSTALLATION (from Nov 2005) →