2005-2008 Yaris · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Nov 2006


1. INSTALL COOLING FAN RESISTOR

A108461
  1. Install the cooling fan resistor with the 2 bolts.

    Torque:
    5.1 N*m{ 52 kgf*cm , 45 in.*lbf }

  1. Connect the cooling fan resistor connector.


2. INSTALL FRONT FENDER LINER LH
  1. Install the front fender liner with the 3 screws, 6 clips and 4 grommets.

    NOTICE:
    The speed sensor wire should not protrude beyond the front fender liner.


3. INSTALL FRONT WHEEL LH

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

← INSPECTION (from Nov 2006)COMPONENTS (from Nov 2006) →