INSTALLATION
Removal / installation · Vehicles built from Aug 2005
| 1. INSTALL AMBIENT TEMPERATURE SENSOR |
![]() ![]() |
Engage the clamp and install the ambient temperature sensor.
| 2. INSTALL FRONT BUMPER COVER |
w/ Front Spoiler:

Install the 2 clips and the 4 screw grommets.
w/o Front Spoiler:

Install the 2 clips and the screw grommet.
w/ Fog Light:
Connect the 2 fog light connectors.

Engage the 6 claws and install the front bumper cover.
w/o Fog Light:

Engage the 6 claws and install the front bumper cover.
w/ Front Spoiler:

Install the 7 clips.
Install the 2 screw grommets.
Tighten the 3 screws.
w/o Front Spoiler:

Install the 7 clips.
Install the 2 screw grommets.
Tighten the 8 screws.
Remove the protective tape.

| 3. INSTALL FRONT SPOILER COVER RH (w/ Front Spoiler) |
Install the front spoiler cover with the 4 screws.

| 4. INSTALL FRONT SPOILER COVER LH (w/ Front Spoiler) |
Install the front spoiler cover with the 5 screws.

| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

