INSTALLATION
Removal / installation · Vehicles built from Jan 2006
| 1. INSTALL AMBIENT TEMPERATURE SENSOR |
![]() ![]() |
Engage the clamp and install the ambient temperature sensor.
Connect the connector.
| 2. INSTALL FRONT BUMPER COVER |
Install the 2 clips and the screw grommet.

w/ Fog Light:

Connect the 2 fog light connectors.
Engage the 6 claws and install the front bumper cover.
w/o Fog Light:

Engage the 6 claws and install the front bumper cover.
Install the 6 clips.

Install the 2 screw grommets.
Tighten the 7 screws and 3 bolts.
Remove the protective tape.

| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

