2005-2008 Yaris · Service Manual BODY

INSPECTION

Inspection · Vehicles built from Aug 2005


INSPECT SEAT HEATER SWITCH

  1. B117783E01
    Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Switch Position
      Tester Connection
      Specified Condition
      OFF
      5 - 6, 3 - 4
      10 kΩ or higher
      L switch ON
      5 - 6
      Below 1 Ω
      R switch ON
      3 - 4
      Below 1 Ω

      If the result is not as specified, replace the seat heater switch.

  1. B117784E01
    Check the operation.

    1. Apply battery voltage to the terminals, and push each of the seat heater switches and check that the indicator illuminates.

      Standard:
      Switch Position
      Condition
      Standard
      L switch ON
      Positive battery 5 (IGL) - Negative battery 2 (E)
      Illuminates
      R switch ON
      Positive battery 4 (IGR) - Negative battery 2 (E)
      Illuminates

      If the result is not as specified, replace the seat heater switch.

← REMOVAL (from Aug 2005)INSTALLATION (from Aug 2005) →