2005-2008 Yaris · Service Manual SUSPENSION & AXLE

DISASSEMBLY

Removal / installation · Vehicles built from Nov 2005


1. REMOVE FRONT AXLE HUB HOLE SNAP RING

C112582
  1. Using snap ring pliers, remove the hole snap ring.

    NOTICE:
    When removing the hole snap ring, do not damage the magnetic rotor surface.


2. REMOVE FRONT AXLE HUB SUB-ASSEMBLY

C057871E01
  1. Fix the steering knuckle in a vise between aluminum plates.

    NOTICE:
    Do not overtighten the vise.

  1. Using SST, remove the axle hub.

    SST
    09520-00031  

  1. G031908E01
    Using SST, remove the hub bearing inner race from the axle hub.
    SST
    09950-40011   (09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04011, 09957-04010, 09958-04011)
    09950-60010   (09951-00370)


3. REMOVE FRONT DISC BRAKE DUST COVER

C130307
  1. Using "Torx" socket wrench T30, remove the 3 bolts and the dust cover.


4. REMOVE FRONT AXLE HUB BEARING

C112580E01
  1. Install the removed hub bearing inner race onto the outer side of the hub bearing.

  1. Using SST and a press, remove the hub bearing from the steering knuckle.

    SST
    09223-15020  
    09387-00041   (09387-02010)
    09950-60010   (09951-00630)
    09950-70010   (09951-07100)

← REMOVAL (from Nov 2005)REASSEMBLY (from Nov 2005) →