REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1. REMOVE TRANSMITTER BATTERY |
![]() ![]() |
- NOTICE:
- Special caution should be taken when handling precision electronic components.
Remove the transmitter battery.
Remove the screw and the cover.
- NOTICE:
- Do not pry out the cover forcibly.
- HINT:
- Slide the cover with a finger as shown in the illustration, so that there is a small gap, then remove the cover through the gap.
Remove the door control transmitter module.
Using a screwdriver with its tip wrapped in protective tape, pry apart the transmitter battery cover.

Remove the battery (lithium battery: CR2016).

- NOTICE:
- Do not push the terminals with a finger.
- Prying up the battery (lithium battery: CR2016) to forcibly remove it will deform the terminals.
- Do not push the terminals with a finger.

