INSTALLATION
Removal / installation · Vehicles built from Aug 2005
| 1. INSTALL CIGARETTE LIGHTER INDICATOR LENS |
Engage the 2 claws and install a new cigarette lighter indicator lens.

| 2. INSTALL CIGARETTE LIGHTER COVER |
Engage the 2 claws and install the cigarette lighter cover.

Align the protrusion of the cigarette lighter socket with the cutout of the cigarette lighter indicator lens and install the cigarette lighter socket.

Securely engage the claw.
Connect the cigarette lighter connector.

| 3. INSTALL CIGARETTE LIGHTER KNOB |
Install the cigarette lighter knob.

| 4. CONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System) |
![]() ![]() |
Engage the 2 claws and connect the air inlet damper control cable.
| 5. CONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System) |
![]() ![]() |
Engage the 2 claws and connect the defroster damper control cable.
| 6. CONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System) |
![]() ![]() |
Engage the 2 claws and connect the air mix control cable clamp.
Connect the defroster damper control cable to the clamp.
| 7. INSTALL INSTRUMENT CLUSTER FINISH LOWER CENTER PANEL SUB-ASSEMBLY (for Manual Air Conditioning System) |
![]() ![]() |
Connect the 3 connectors and the clamp.
Engage the 3 clips and 2 claws and install the air conditioning panel.

| 8. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System) |
![]() ![]() |
Connect the 2 connectors and the aspirator pipe and engage the clamp.
Engage the 3 clips and 2 claws and install the air conditioner control.

| 9. INSTALL INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY (w/ Cassette Tape Player) |
![]() ![]() |
Engage the 4 clips and 2 claws and install the instrument cluster finish panel.
| 10. INSTALL INSTRUMENT CLUSTER FINISH PANEL |
![]() ![]() |
Fit the 3 A claws of the instrument cluster finish panel into the upper instrument cluster finish panel center.
Engage the 4 claws and 5 clips and install the instrument cluster finish panel.

| 11. INSTALL INSTRUMENT PANEL FINISH PANEL END RH |
![]() ![]() |
with CD player
Connect the connector.
Engage the 4 claws and 3 clips and install the instrument panel finish panel end RH.
Except CD player

Connect the connector.
Engage the 5 claws and 3 clips and install the instrument panel finish panel end RH.
| 12. INSTALL INSTRUMENT PANEL FINISH PANEL END LH |
![]() ![]() |
with CD player
Connect the connector.
Engage the 4 claws and 3 clips and install the instrument panel finish panel end LH.
Except CD player

Connect the connector.
Engage the 5 claws and 3 clips and install the instrument panel finish panel end LH.
| 13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }









