2005-2008 Yaris · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built from Aug 2005


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. DRAIN BRAKE FLUID

NOTICE:
Immediately wash off any brake fluid that comes into contact with any painted surfaces.


3. DISCONNECT CLUTCH RESERVOIR TUBE (for Manual Transaxle)

C107585
  1. Slide the clip and disconnect the reservoir tube.


4. REMOVE BRAKE MASTER CYLINDER

NOTICE:
Remove the brake master cylinder after depressing the brake pedal several times and bleeding the vacuum pressure from inside the brake booster.

  1. Disconnect the brake fluid level warning switch connector.

  1. C107586E01
    Using SST, separate the 2 brake tubes from the brake master cylinder.
    SST
    09023-00100  

  1. C107587
    Remove the 2 nuts and remove the brake master cylinder.

  1. Remove the O-ring from the brake master cylinder.

← COMPONENTS (from Aug 2005)DISASSEMBLY (from Aug 2005) →