Radio Broadcast cannot be Received (Bad Reception)
Circuit diagnosis · Vehicles built from Aug 2005
INSPECTION PROCEDURE
| 1. CHECK WHETHER RADIO AUTO-SEARCH FUNCTIONS PROPERLY |
Check whether the radio auto-search functions properly.
Tune the radio using the auto-search function and check that it operates normally.
- OK:
- The radio auto-search functions properly.
|
|
||||
| NG | |
| 2. CHECK OPTIONAL COMPONENTS |
Check whether any optional components, such as telephone antenna, are installed.
- OK:
- Optional component(s) installed.
|
|
||||
| NG | |
| 3. INSPECT RADIO RECEIVER (ANTENNA) |
Remove the antenna plug of the radio receiver.

With the radio receiver connector connected, turn the ignition switch on (ACC).
Turn on the radio and select the AM mode.
Place a flat-head screwdriver or piece of metal, such as a thin wire, on the antenna jack of the radio receiver. Check that noise is heard from the speakers.
- OK:
- Noise occurs.
|
|
||||
| OK | ||
| ||
