2005-2008 Yaris · Service Manual SERVICE SPECIFICATIONS

SERVICE DATA

Specifications · Vehicles built from Aug 2005

OCCUPANT DETECTION SENSOR (for Sedan): 
Item
Tester Connection
Condition
Specified Condition
Standard resistance
1 - 3
More than 29 N (3 kgf, 7 lbf) applied to occupant detection sensor
Below 100 Ω
Seat not occupied
1 MΩ or higher
OCCUPANT DETECTION SENSOR (for TMC Made Hatchback): 
Item
Tester Connection
Condition
Specified Condition
Standard resistance
1 - 3
More than 29 N (3 kgf, 7 lbf) applied to occupant detection sensor
Below 100 Ω
Seat not occupied
1 MΩ or higher
OCCUPANT DETECTION SENSOR (for TMMF Made Hatchback): 
Item
Tester Connection
Condition
Specified Condition
Standard resistance
1 - 2
More than 29 N (3 kgf, 7 lbf) applied to occupant detection sensor
Below 100 Ω
Seat not occupied
1 MΩ or higher
FRONT SEAT INNER BELT ASSEMBLY (for Sedan Driver Side): 
Item
Tester Connection
Condition
Specified Condition
Standard resistance
1 - 2
Tongue plate fastened
10 kΩ or higher
Tongue plate released
Below 1 Ω
FRONT SEAT INNER BELT ASSEMBLY (for Sedan Front Passenger Side): 
Item
Tester Connection
Condition
Specified Condition
Standard resistance
A1 - B3
Tongue plate fastened
10 kΩ or higher
Tongue plate released
Below 1 Ω
A2 - B1
Always
Below 1 Ω
FRONT SEAT INNER BELT ASSEMBLY (for TMC Made Hatchback Driver Side): 
Item
Tester Connection
Condition
Specified Condition
Standard resistance
1 - 2
Tongue plate fastened
10 kΩ or higher
Tongue plate released
Below 1 Ω
FRONT SEAT INNER BELT ASSEMBLY (for TMC Made Hatchback Front Passenger Side): 
Item
Tester Connection
Condition
Specified Condition
Standard resistance
A1 - B3
Tongue plate fastened
10 kΩ or higher
Tongue plate released
Below 1 Ω
A2 - B1
Always
Below 1 Ω
FRONT SEAT INNER BELT ASSEMBLY (for TMMF Made Hatchback Driver Side): 
Item
Tester Connection
Condition
Specified Condition
Standard resistance
1 - 2
Tongue plate fastened
10 kΩ or higher
Tongue plate released
Below 1 Ω
FRONT SEAT INNER BELT ASSEMBLY (for TMMF Made Hatchback Front Passenger Side): 
Item
Tester Connection
Condition
Specified Condition
Standard resistance
A1 - B3
Tongue plate fastened
10 kΩ or higher
Tongue plate released
Below 1 Ω
A2 - B1
Always
Below 1 Ω
← TORQUE SPECIFICATIONS (from Aug 2005)TORQUE SPECIFICATIONS (from Aug 2005) →