2005-2008 Yaris · Service Manual ENGINE

REPLACEMENT

Removal / installation · Vehicles built from Aug 2005

CAUTION:
  1. Prolonged and repeated contact with engine oil will result in the removal of natural oils from the skin, leading to dryness, irritation and dermatitis, used engine oil contains potentially harmful contaminants which may cause skin cancer.
  2. Take precautions when replacing engine oil to minimize the risk of your skin making contact with used engine oil. Wear protective clothing and gloves that cannot be penetrated by oil. Wash skin with soap and water, or use waterless hand cleaner, to remove any used engine oil thoroughly. Do not use gasoline, thinner, or solvents.
  3. Dispose of used oil and used oil filters at designated disposal sites in order to preserve the environment.


1. DRAIN ENGINE OIL

A118700
  1. Remove the oil pan drain plug and drain the engine oil.

  1. Clean the oil pan drain plug and install it with a new gasket.

    Torque:
    30 N*m{ 306 kgf*cm , 22 ft.*lbf }


2. REMOVE OIL FILTER SUB-ASSEMBLY

A118705E01
  1. Using SST, remove the oil filter.

    SST
    09228-06501  


3. INSTALL OIL FILTER SUB-ASSEMBLY

A118706E01
  1. Check and clean the oil filter installation surface.

  1. Apply clean engine oil to the gasket of a new oil filter.

  1. Gently screw the oil filter into place, then tighten it until the gasket comes into contact with the seat.

  1. Using SST, tighten it an additional 3/4 turn.

    SST
    09228-06501  


4. ADD ENGINE OIL
  1. Fill with new engine oil.

    Oil capacity:
    Item
    Specification
    With oil filter change
    3.1 liter (3.3 Us qts, 2.7 lmp. qts)
    Without oil filter change
    2.9 liter (3.1 Us qts, 2.6 lmp. qts)
    Dry fill
    3.4 liter (3.6 Us qts, 3.0 lmp. qts)


5. CHECK FOR ENGINE OIL LEAKAGE
← COMPONENTS (from Aug 2005)COMPONENTS (Aug 2005 – Oct 2005) →