REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE ENGINE COVER SUB-ASSEMBLY NO. 1 |
![]() ![]() |
Disengage the 4 pins and remove engine cover No. 1.
| 3. REMOVE AIR HOSE NO.3 |
Loosen the 2 hose clamp bolts and remove air hose No. 3.

| 4. REMOVE DIESEL THROTTLE BODY ASSEMBLY |
Disconnect the throttle control motor connector.

Disconnect the throttle position sensor connector.
Remove the 4 bolts and remove the diesel throttle body and gasket.


