INSTALLATION
Removal / installation · Vehicles built from Nov 2005
| 1.
INSTALL CLUTCH ACCUMULATOR ASSEMBLY |
 |
Install the clutch accumulator with the 2 bolts and nut.
-
Torque:
- 37 N*m{
380 kgf*cm
, 28 ft.*lbf
}
for bolt
- 5.0 N*m{
51 kgf*cm
, 44 in.*lbf
}
for nut
- Install the flexible hose bracket with the bolt.
-
Torque:
- 19 N*m{
194 kgf*cm
, 14 ft.*lbf
}
- Using SST, install the accumulator to flexible hose tube.
- SST
- 09023-00101
-
Torque:
- 15 N*m{
155 kgf*cm
, 11 ft.*lbf
}
- Using SST, connect the release cylinder to accumulator tube.
- SST
- 09023-00101
-
Torque:
- 15 N*m{
155 kgf*cm
, 11 ft.*lbf
}
| 3.
BLEED CLUTCH PIPE LINE |
 |
Fill the brake reservoir tank with brake fluid and bleed the clutch system.
-
Torque:
- 8.3 N*m{
85 kgf*cm
, 73 in.*lbf
}
| 4.
INSPECT BRAKE FLUID LEVEL |
|
| 5.
CHECK FOR CLUTCH FLUID LEAKAGE |
|
| 6.
INSTALL ENGINE UNDER COVER |
|