REMOVAL
Removal / installation · Vehicles built from Jan 2006
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER |
![]() ![]() |
Disengage the 2 claws and 2 clips and remove the instrument panel finish panel lower center.
| 3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) |
Remove the shift lever knob.

| 4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
Shift the shift lever into the N position.

Disengage the 5 clips and the claw and remove the upper console panel.
| 5. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY |
Disengage the 3 clips and 3 claws.

Disconnect the connector and remove the console upper rear panel.
| 6. REMOVE CONSOLE BOX CARPET |
![]() ![]() |
Remove the console box carpet.
| 7. REMOVE REAR CONSOLE BOX ASSEMBLY |
Disconnect the clamp.

Remove the 2 bolts and 2 screws.
Disengage the 4 claws and remove the rear console box.


