2005-2008 Yaris · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Nov 2005


1. DRAIN ENGINE COOLANT

CAUTION:
To avoid the danger of being burned, do not remove the radiator cap sub-assembly while the engine and radiator assembly are still hot. Thermal expansion will cause hot engine coolant and steam to blow out from the radiator assembly.

  1. A117319
    Install a vinyl hose onto the radiator.

  1. Loosen the radiator drain cock plug.

  1. Remove the radiator cap sub-assembly.

  1. Loosen the water drain plug, then drain the coolant.

    A128298E01


2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

  1. A127144
    Remove the grommet and 2 clamps and remove the air cleaner cap sub-assembly.


3. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

4. REMOVE WATER INLET

  1. A127230
    Remove the bolt and the nut and remove the water inlet with radiator hose.


5. REMOVE THERMOSTAT

A131383
  1. Remove the thermostat.

← COMPONENTS (from Nov 2005)INSPECTION (from Nov 2005) →