2005-2008 Yaris · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Nov 2005


1. INSTALL PURGE VSV

  1. A127216
    Install the purge VSV with the screw.


2. INSTALL PURGE VSV ASSEMBLY

  1. A127215
    Install the purge VSV assembly with the bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. A127214
    Connect the purge VSV connector with the clamp.


3. CONNECT CHARCOAL CANISTER FUEL HOSE

  1. A127213
    Connect the charcoal canister fuel hose.


4. CONNECT NO. 1 FUEL VAPOR FEED HOSE

  1. A127212
    Connect the No. 1 fuel vapor feed hose.


5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

← INSPECTION (from Nov 2005)PARTS LOCATION (from Nov 2006) →