REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1. REMOVE ENGINE UNDER COVER RH |
| 2. DISCONNECT FAN AND GENERATOR V BELT |
![]() ![]() |
Loosen bolts A and B.
Turn adjusting bolt C to release the tension and remove the V belt from the pulleys.
| 3. REMOVE TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR |
![]() ![]() |
Remove the bolt and remove the low pressure pipe stay of the air conditioner (w/air conditioning system).
Support the oil pan with a jack, placing a wooden block in between.

Remove the 5 bolts and nut.

Operate the jack and remove the engine mounting insulator.
| 4. REMOVE FAN AND GENERATOR V BELT |
Remove the fan and generator V belt.


