2005-2008 Yaris · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Nov 2005


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE ACCELERATOR PEDAL ASSEMBLY (for LHD)

  1. A128265
    Disconnect the accelerator pedal connector.

  1. Remove the 3 bolts and accelerator pedal.

    NOTICE:
    1. Do not drop or strike the accelerator pedal.
    2. Do not disassemble the accelerator pedal.


3. REMOVE ACCELERATOR PEDAL ASSEMBLY (for RHD)

  1. A128266
    Disconnect the accelerator pedal connector.

  1. Remove the 2 bolts and accelerator pedal.

    NOTICE:
    1. Do not drop or strike the accelerator pedal.
    2. Do not disassemble the accelerator pedal.

← ON-VEHICLE INSPECTION (from Nov 2005)INSTALLATION (from Nov 2005) →