2005-2008 Yaris · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built from Jan 2006


INSPECT INTEGRATION RELAY (Built in Horn Relay)

  1. B138430E01
    Check the resistance.

    1. Remove the horn fuse.

    2. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Tester Connection
      Specified Condition
      A8 - T6
      10 kΩ or higher
      Below 1 Ω
      (Battery voltage applied to terminals A7 and T6)

      If the result is not as specified, replace the integration relay.

← REMOVAL (from Jan 2006)INSTALLATION (from Jan 2006) →