INSTALLATION
Removal / installation · Vehicles built from Jan 2006
| 1.
INSTALL LOW PITCHED HORN ASSEMBLY |
 |
- Install the low pitched horn with the bolt.
-
Torque:
- 19.5 N*m{
200 kgf*cm
, 14 ft.*lbf
}
- NOTICE:
- Do not place the low pitched horn over the stopper of body.
Connect the low pitched horn connector.
| 2.
INSTALL FRONT BUMPER COVER
|
 |
- w/ Fog Light:
Connect the 2 fog light connectors.
Engage the 6 claws and install the front bumper cover.
- w/o Fog Light:
Engage the 6 claws and install the front bumper cover.
- Install the 6 clips.
Install the 2 screw grommets.
Tighten the 7 screws and 3 bolts.
- Remove the protective tape.
| 3.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
-
Torque:
- 5.4 N*m{
55 kgf*cm
, 48 in.*lbf
}