REMOVAL
Removal / installation · Vehicles built from Jan 2006
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE FRONT BUMPER COVER |
Apply protective tape, as shown in the illustration.

Remove the 7 screws and 3 bolts.

Remove the 2 screw grommets.
Remove the 6 clips.
w/ Fog Light:

Disengage the 6 claws and remove the front bumper cover.
Disconnect the 2 fog light connectors.
w/o Fog Light:

Disengage the 6 claws and remove the front bumper cover.
| 3. REMOVE LOW PITCHED HORN ASSEMBLY |
Disconnect the low pitched horn connector.

Remove the bolt and the low pitched horn.
