052 Safety Time Exceeded
Diagnostic trouble codes · Vehicles built from Nov 2005
DESCRIPTION
| DTC No. |
DTC Detection Condition |
Trouble Area |
| 052 |
A heater ignition failure is detected. |
|
INSPECTION PROCEDURE
| 1. INSPECT INTAKE AIR DUCT |
Inspect the intake air duct.
- Result:
Result
Proceed to
There is no problem with the intake air duct.
A
The intake air duct is clogged, or other problems are found.
B
|
|
||||
| A | |
| 2. INSPECT EXHAUST AIR DUCT |
Inspect the exhaust air duct.
- Result:
Result
Proceed to
There is no problem with the exhaust air duct.
A
The exhaust air duct is clogged, or other problems are found.
B
|
|
||||
| A | |
| 3. INSPECT HEATER FUEL PUMP |
Measure the resistance.

- Standard resistance:
Tester connection
Specified condition
1 (+B) - 2 (E2)
9 to 12 Ω
Inspect heater fuel pump operation.
Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2, and check the pressure of the hose by hand.
- NOTICE:
- This inspection must be done quickly (within 10 seconds) to prevent damage to the heater fuel pump.
- OK:
- The pressure is applied to the hose.
|
|
||||
| OK | |
| 4. REPLACE FUEL PUMP FILTER |
Replace the fuel pump filter with a normal one and check that the condition returns to normal.
- OK:
- The heater is ignited normally and it starts operating.
|
|
||||
| NG | ||
| ||
