2005-2008 Yaris · Service Manual BODY

DISASSEMBLY

Removal / installation · Vehicles built from Jan 2006


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE REAR SPOILER SUB-ASSEMBLY (w/ Rear Spoiler)

  1. B134851
    Disconnect the center stop light connector.

  1. Remove the 2 bolts.

  1. B138463E02
    Apply protective tape to the luggage compartment door panel in the periphery of the rear spoiler.

  1. Using an infrared light, heat the adhesive tape remaining on the rear spoiler.

    HINT:
    Heat at 40 to 60°C (104 to 140°F) for 1 to 2 minutes.

  1. Tie both piano wire ends to wooden blocks or similar objects.

  1. B134852E02
    Cut the adhesive tape by pulling the piano wire alternatively toward you.

  1. When reusing the rear spoiler, set the wooden blocks or similar objects along the body to avoid damaging the rear spoiler end portion.

  1. B134853
    Disengage the 2 clips and remove the rear spoiler.


3. REMOVE HIGH MOUNTED STOP LIGHT (w/ Rear Spoiler)

  1. B138621
    Tie a piece of string to the tip of the wire harness.

  1. Remove the 2 screws and the high mounted stop light.


4. REMOVE LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY

  1. E127146
    Remove the snap ring in the direction indicated by the arrow and remove the luggage compartment door lock link.

  1. E127147
    Disconnect the connector.

  1. Disengage the claw and pull up the protector lid in the direction indicated by the arrow.

  1. E127148
    Remove the luggage door lock control cable.

  1. Remove the 2 bolts and the luggage compartment door lock assembly.


5. REMOVE LUGGAGE COMPARTMENT LOCK CYLINDER

B140689
  1. Remove the 2 nuts and the luggage compartment lock cylinder.


6. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

  1. B134844
    Remove the 2 nuts.

  1. Disengage the 3 clips and remove the luggage compartment door outside garnish.


7. REMOVE LICENSE PLATE LIGHT ASSEMBLY

E125503E01
  1. Pull the license plate light assembly in the direction indicated by arrow 1, shown in the illustration. Disengage claw B by pulling claw A toward you while flexing it and remove the license plate light assembly.

  1. E125505
    Turn the license plate light socket and bulb, in the directions indicated by the arrow in the illustration, to remove them.

  1. Remove the license plate light bulb from the light socket.


8. REMOVE NO. 6 LUGGAGE COMPARTMENT DOOR NAME PLATE

  1. B134862E01
    Apply protective tape, as shown in the illustration.

  1. Using an infrared light, heat the No. 6 luggage compartment door name plate.

    CAUTION:
    Do not burn yourself with the heated luggage compartment door panel or infrared light.

    HINT:
    Heat at 40 to 60°C (104 to 140°F) for 1 to 2 minutes.

  1. B134863E01
    Using a gasket scraper with its tip wrapped in protective tape, gradually peel the adhesive surface and remove the No. 6 luggage compartment door name plate.

  1. Remove the protective tape.


9. REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE

  1. B134865E01
    Apply protective tape, as shown in the illustration.

  1. Using an infrared light, heat the No. 2 luggage compartment door name plate.

    CAUTION:
    Do not burn yourself with the heated luggage compartment door panel or infrared light.

    HINT:
    Heat at 40 to 60°C (104 to 140°F) for 1 to 2 minutes.

  1. B134866E01
    Using a gasket scraper with its tip wrapped in protective tape, gradually peel the adhesive surface and remove the No. 2 luggage compartment door name plate.

  1. Remove the protective tape.


10. REMOVE SYMBOL EMBLEM

  1. B134868E01
    Apply protective tape, as shown in the illustration.

  1. Using an infrared light, heat the symbol emblem.

    CAUTION:
    Do not burn yourself with the heated luggage compartment door panel or infrared light.

    HINT:
    Heat at 40 to 60°C (104 to 140°F) for 1 to 2 minutes.

  1. B134869E01
    Using a gasket scraper with its tip wrapped in protective tape, gradually peel the adhesive surface and remove the symbol emblem.

  1. Remove the protective tape.


11. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

B136269
  1. Remove the luggage compartment floor mat.


12. REMOVE SPARE WHEEL COVER ASSEMBLY

B136270
  1. Remove the spare wheel cover.


13. REMOVE DECK SIDE BOX DOOR RH

B136271
  1. Remove the deck side box door RH.


14. REMOVE DECK SIDE BOX DOOR LH

HINT:
Use the same procedure as described for the RH side.


15. REMOVE DECK FLOOR BOX RH

B136273
  1. Remove the deck floor box RH.


16. REMOVE DECK FLOOR BOX LH

HINT:
Use the same procedure as described for the RH side.


17. REMOVE REAR FLOOR FINISH PLATE

B136276
  1. Disengage the 8 claws and 2 clips and remove the rear floor finish plate.


18. REMOVE LUGGAGE COMPARTMENT TRIM COVER INNER RH

B140673
  1. Disengage the 5 clips and remove the luggage compartment trim cover inner RH.


19. REMOVE LUGGAGE COMPARTMENT TRIM COVER INNER LH

HINT:
Use the same procedure as described for the RH side.


20. REMOVE LUGGAGE COMPARTMENT TRIM INNER PAD

B136275
  1. Remove the luggage compartment trim inner pad.


21. REMOVE LUGGAGE COMPARTMENT DOOR WEATHERSTRIP

B140676
  1. Remove the luggage compartment door weatherstrip.

← COMPONENTS (from Jan 2006)ADJUSTMENT (from Jan 2006) →