2005-2008 Yaris · Service Manual RESTRAINTS

REMOVAL

Removal / installation · Vehicles built from Jan 2006

HINT:
The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/o Rear Spoiler)

2. REMOVE REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY
  1. for 60/40 Split Seat Type:

    1. Remove the rear seat cushion cover pad sub-assembly (Click here).

  1. for Fixed Seat Type:

    1. Remove the rear seat cushion cover pad sub-assembly (Click here).


3. REMOVE REAR SEATBACK ASSEMBLY RH (for 60/40 Split Seat Type)

  1. B134943
    Remove the rear seat outer belt from the rear seat shoulder belt guide.

  1. for 3 Point Type Rear Center Seat Belt:

    1. Remove the rear center seat outer belt from the rear center seat shoulder belt guide.

  1. Pull the rear seatback lock release button and tilt the rear seatback forward.

  1. B134944
    Using a clip remover, remove the 2 clips and the rear seatback cover.

  1. B134945
    Remove the 2 bolts, the 2 hooks and the rear seatback.


4. REMOVE REAR SEATBACK ASSEMBLY LH (for 60/40 Split Seat Type)

  1. B134924
    Remove the rear seat outer belt from the rear seat shoulder belt guide.

  1. Pull the rear seatback lock release button and tilt the rear seatback forward.

  1. B134925
    Using a clip remover, remove the 2 clips and the rear seatback cover.

  1. B134926
    Remove the 2 bolts, the 2 hooks and the rear seatback.


5. REMOVE REAR SEATBACK ASSEMBLY (for Fixed Seat Type)

  1. B138450E01
    Remove the rear seat outer belt from the rear seat shoulder belt guide.

    HINT:
    Use the same procedure for both sides.

  1. for 3 Point Type Rear Center Seat belt:

    1. Remove the rear center seat outer belt from the rear center seat shoulder belt guide.

  1. B134981
    Remove the 3 bolts.

  1. Disengage the 3 hooks and remove the rear seatback.


6. REMOVE LUGGAGE COMPARTMENT FLOOR MAT (for 60/40 Split Seat Type)

B136269
  1. Remove the luggage compartment floor mat.


7. REMOVE SPARE WHEEL COVER ASSEMBLY (for 60/40 Split Seat Type)

B136270
  1. Remove the spare wheel cover.


8. REMOVE LUGGAGE COMPARTMENT TRIM INNER PAD (for 60/40 Split Seat Type)

B136275
  1. Remove the luggage compartment trim inner pad.


9. REMOVE REAR DOOR SCUFF PLATE RH

  1. B134771
    Disengage the 7 claws and remove the rear door scuff plate.


10. REMOVE REAR DOOR SCUFF PLATE LH

HINT:
Use the same procedure as for the RH side.


11. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

  1. B138636
    Remove the rear door opening trim weatherstrip to the extent that the rear seat side cover and roof side inner garnish can be removed.


12. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

HINT:
Use the same procedure as for the RH side.


13. REMOVE REAR SEAT SIDE COVER RH

  1. B134776
    Disengage the 2 clips and the 4 claws and remove the rear seat side cover.


14. REMOVE REAR SEAT SIDE COVER LH

HINT:
Use the same procedure as for the RH side.


15. REMOVE ROOF SIDE INNER GARNISH RH

  1. B134775E01
    w/ Curtain Shield Airbag:

    NOTICE:
    Replace the special clip with a new one when the roof side inner garnish is removed.


    1. Disengage the 4 clips and the claw and remove the roof side inner garnish.

  1. B134774
    w/o Curtain Shield Airbag:

    1. Disengage the 4 clips and the claw and remove the roof side inner garnish.


16. REMOVE ROOF SIDE INNER GARNISH LH

HINT:
Use the same procedure as for the RH side.


17. REMOVE HIGH MOUNTED STOP LIGHT ASSEMBLY (w/o Rear Spoiler)

  1. E127158
    Disengage the 2 claws.

  1. E127159
    Disengage the 2 claws.

  1. Disconnect the connector and remove the high mounted stop light assembly.


18. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY

  1. B134912
    for 3 Point Type Rear Center Seat Belt:

    1. Using a clip remover, remove the 4 clips.

    2. Disengage the 5 claws and remove the package tray trim panel.

  1. B134913
    for 2 Point Type Rear Center Seat Belt:

    1. Using a clip remover, remove the 3 clips.

    2. Disengage the 5 claws and remove the package tray trim panel.


19. REMOVE REAR SEAT OUTER BELT ASSEMBLY

  1. B134917
    Remove the bolt.

  1. Disengage the 2 claws and remove the anchor plate.

  1. B134918
    Remove the bolt, the hook and the retractor.


20. REMOVE SEAT BELT HOLE SEAL

  1. B134919
    Disengage the 2 claws and remove the seat belt hole seal.

← COMPONENTS (from Jan 2006)INSTALLATION (from Jan 2006) →