TORQUE SPECIFICATIONS
Specifications · Vehicles built from Nov 2005
| Part Tightened |
N*m |
kgf*cm |
ft.*lbf |
|
| Fan belt adjusting slider x Cylinder block sub-assembly |
for bolt B |
34 |
347 |
25 |
| Terminal B x Generator assembly |
9.8 |
100 |
87 in.*lbf |
|
| Wire harness clamp bracket (for LHD) x Body |
for Bolt A |
13 |
133 |
10 |
| for Bolt B |
5.4 |
55 |
48 in.*lbf |
|
| Negative battery terminal x Negative battery cable |
5.4 |
55 |
48 |
|
| Generator pulley x Generator rotor assembly |
65 |
663 |
48 |
|
| Stator sub-assembly generator with rectifier x Drive end frame |
4.3 |
44 |
38 in.*lbf |
|
| Cord clip x Stator sub-assembly generator with rectifier |
6.5 |
66 |
58 in.*lbf |
|
| Regulator sub-assembly generator with brush x Stator sub-assembly generator with rectifier |
for screw A |
2.5 |
25 |
22 in.*lbf |
| for screw B |
1.2 |
12 |
11 in.*lbf |
|
| Rear generator end cover x Stator sub-assembly generator with rectifier |
for nut A |
19 |
194 |
14 |
| for nut B |
12 |
122 |
9 |
|
| for screw |
2.8 |
29 |
25 in.*lbf |
|