INSTALLATION
Removal / installation · Vehicles built from Jan 2006
| 1. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY |
![]() ![]() |
Engage the 2 claws and install the power window regulator switch.
| 2. INSTALL FRONT ARMREST BASE UPPER PANEL |
![]() ![]() |
for Driver side with power window:
Connect the connector.
Engage the 7 claws and 2 clips and install the front armrest base upper panel.
Tighten the screw.
for Front passenger side with power window:

Connect the connector.
Engage the 7 claws and 2 clips and install the front armrest base upper panel.
Tighten the screw.
w/o Power window:

Engage the 5 clips and 2 clips and install the front armrest base upper panel.
Tighten the screw.
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }


