REMOVAL
Removal / installation · Vehicles built from Jan 2006
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE FRONT ARMREST BASE UPPER PANEL |
![]() ![]() |
for Driver side with power window:
Remove the screw.
Disengage the 7 claws and 2 clips and remove the front armrest base upper panel.
Disconnect the connector.
for Front passenger side with power window:

Remove the screw.
Disengage the 7 claws and 2 clips and remove the front armrest base upper panel.
Disconnect the connector.
w/o Power window:

Remove the screw.
Disengage the 5 claws and 2 clips and remove the front armrest base upper panel.
| 3. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY |
![]() ![]() |
Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the power window regulator switch.


