INSTALLATION
Removal / installation · Vehicles built from Jan 2006
| 1. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY REAR |
![]() ![]() |
Engage the set plate and install the power window regulator switch.
| 2. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY |
![]() ![]() |
Connect the rear door lock remote control cable and rear door inside locking cable.
w/ Power window:
Connect the connector.
Engage the 7 clips and install the rear door trim board.

Tighten the screw.

| 3. INSTALL REAR DOOR ARMREST BASE UPPER PANEL |
![]() ![]() |
Engage the 4 claws and install the rear door armrest base upper panel.
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }



