REMOVAL
Removal / installation · Vehicles built from Jan 2006
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE REAR DOOR ARMREST BASE UPPER PANEL |
![]() ![]() |
Disengage the 4 claws and remove the rear door armrest base upper panel.
| 3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY |
Remove the screw.

Disengage the 7 clips.

w/ Power window:
Disconnect the connector.
Disconnect the rear door lock remote control cable and rear door inside locking cable and remove the rear door trim board.

| 4. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY REAR |
![]() ![]() |
Disengage the set plate and remove the power window regulator switch.


