2005-2008 Yaris · Service Manual RESTRAINTS

INSTALLATION

Removal / installation · Vehicles built from Jan 2006


1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY (Built in Front Passenger Seat Belt Warning Light)

  1. B138529
    Engage the 3 claws and install the hazard warning signal switch.


2. INSTALL INSTRUMENT PANEL CENTER REGISTER ASSEMBLY

  1. E127121
    Engage the 8 claws and install the instrument panel center register.


3. INSTALL INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY

B132395
  1. Engage the 2 claws and 4 clips and install the instrument cluster finish panel center.


4. INSTALL INSTRUMENT CLUSTER FINISH PANEL

E116833
  1. Fit the 2 claws of the instrument cluster finish panel into the upper instrument cluster finish panel center.

  1. E116834
    Engage the 5 claws and 5 clips and install the instrument cluster finish panel.


5. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

B132318
  1. Engage the 6 claws and 3 clips and install the instrument panel finish panel end RH.


6. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

B132317
  1. Engage the 6 claws and 3 clips and install the instrument panel finish panel end LH.


7. INSTALL INSTRUMENT PANEL LOWER CENTER FINISH PANEL

B132316
  1. Engage the 2 claws and 2 clips and install the instrument panel finish panel lower center.


8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

← INSPECTION (from Jan 2006)COMPONENTS (from Aug 2005) →