2005-2008 Yaris · Service Manual RESTRAINTS

REMOVAL

Removal / installation · Vehicles built from Jan 2006


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE INSTRUMENT PANEL LOWER CENTER FINISH PANEL

B132316
  1. Disengage the 2 claws and 2 clips and remove the instrument panel finish panel lower center.


3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

B132318
  1. Disengage the 6 claws and 3 clips and remove the instrument panel finish panel end RH.


4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

B132317
  1. Disengage the 6 claws and 3 clips and remove the instrument panel finish panel end LH.


5. REMOVE INSTRUMENT CLUSTER FINISH PANEL

E116832
  1. Disengage the 4 claws and 5 clips and remove the instrument cluster finish panel.


6. REMOVE INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY

B132395
  1. Disengage the 2 claws and 4 clips and remove the instrument cluster panel center.


7. REMOVE INSTRUMENT PANEL CENTER REGISTER ASSEMBLY

  1. E127121
    Disengage the 8 claws and remove the instrument panel center register.


8. REMOVE HAZARD WARNING SIGNAL SWITCH ASSEMBLY (Built in Front Passenger Seat Belt Warning Light)

  1. B138529
    Disengage the 3 claws and remove the hazard warning signal switch.

← COMPONENTS (from Jan 2006)INSPECTION (from Jan 2006) →